Colouration & Structure
A Silvery-grey to golden-yellow grain runs through the 3-layer panels of "Silver Mine" – livened by dark accents.
The extraordinary look of Silver Mine is modelled on barn planks marked by wind and weather. The texture in the wood runs from silver-grey to golden yellow, whereby exciting accents in the linear grain are set by dark knotholes.
In order to perfect the complete look of the tables, some of the wood decors have design joints. These joints enhance the arrangement of the boards along with the natural look of the wood table.
We specifically seek to enhance the natural grain of our woods. Thus, the table surfaces are brushed.
This designer table top is finished with the wood wane along the length. The broadsides are straight. The long sides of the table top are not sawed off, instead they have a natural finish like a tree, with curves, cracks and uneven areas.
We can also produce the table top with a straight finish, if you wish, or finish the table only in certain areas of your choice. Just contact us.
You can find high resolution pictures of our tables and benches on www.designer-wood.com
Request free color samples
We will gladly ship your desired color sample to you free of charge. With the A3-format samples, you can easily see which decor best suits your interior design.
Order decor sample now!
The designer table tops are crafted from locally-harvested solid spruce or beech boards. These have a thickness between 40 and 60 mm and are also available in individual formats upon request.
These table tops are crafted according to the clients wishes and are not mass-produced, thus they are excluded from the right of return.
Extend this table with one or two matching plug-in plates for table extensions. This table can be equipped with up to two table extensions, which create space for four additional guests
You have the choice - choose your table legs from our large selection and we will finish your designer table to coordinate perfectly with your interior design. We make table legs from wood, varnished or natural, and metal table legs with a brushed- or powder-coated surface.
Without Table Legs
You can also choose "without table legs" and we will ship your table top without mounting holes. You can also choose the table top and table legs separately in the shopping basket -- or simply contact us to discuss your wishes.
Depending on the table leg model, we will ship the matching fastening equipment.
Including the standard thickness of the table top of 40 mm, the height of the table totals 76 cm (+-10 mm).
Our table legs are designed to support approx. 100 kg load. The load capacity depends upon the table leg model. Please contact us if you have questions.
You can assemble the wood table easily by yourself. Check out our assembly instructions.
We purposefully seek to accentuate the natural grain of our wood decors. Thus, the knotholes and grain of our solid spruce boards harvested from local forests are emphasized. Our goal is to ennoble the appearance of our wood, to protect it and reproduce the original trunk as authentically as possible.
Wood is a natural and lively material, so naturally color- and texture changes can and do occur. Additionally, knotholes, notches and the natural grain are accentuated during the surface treatment. Each Sun Wood table is unique and is hand-crafted with care.
The appearance of the table-underside is dependent on the varnish used during the final protective coating. However, we seek to achieve the most uniform appearance of the surface and underside of the table. The varnish does allow the natural surface grain of the wood to shine through.
The waterproof protective coating with UV-absorber makes it possible to use the tables and table tops outside as well with limitations.
Make sure that the tables are not located in direct sunshine. They should also be protected from rain and snow. We recommend using sun- and rain protection. Extreme heat or sun exposure may cause resin flow.
If the table is subjected to heavy use and cleaning, make sure to re-varnish the surface.
Furthermore, wood is a natural material which can deform slightly or form cracks when used outdoors. With the appropriate care, your table top will last for years in good condition.
Important return information
This item has been manufactured according to your own specifications. Thus, you have no right of revocation or return. You can order an A3 format sample of this wood free of charge.
Do you need more technical details and information?
No problem! Just contact us.
One of our wood professionals will be happy to answer your questions.